Tel:0794-7888228 E-mail:rosejiang@jxhongte.com
It is a wholly-owned private enterprise integrating R&D, production and sales of insulating materials, electrical materials and other products.
The company's main products include: imported epoxy resin 8088A/B for transformers with fillers, epoxy resin 8086A/B for imported transformers without fillers, resin 8028A/B at room temperature, core coating 7025A/B, coil repair paint, film release agent, cleaning agent And various composite insulating materials, such as F-class DMD, F-class DMD prepreg, PET composite film, SHS prepreg, high temperature tape, etc. The products are sold to manufacturers of transformers, motors, electrical and electronic equipment all over the country and in ASEAN and other countries.
Product Center
-
Class F DMD PrepregF-grade DMD epoxy prepreg is made of modified polyester film polyester fiber non-woven soft composite material (F-grade DMD) impregnated with heat-resistant epoxy resin and baked.Class F DMD Prepreg0.00F-grade DMD epoxy prepreg is made of modified polyester film polyester fiber non-woven soft composite material (F-grade DMD) impregnated with heat-resistant epoxy resin and baked.
-
PET composite filmComposite polyester film is a three-layer (or two-layer, four-layer) soft composite material made of American DuPont MYLAR polyester film with high temperature resistant adhesive and two sides (or one side) of polyester film.PET composite film0.00Composite polyester film is a three-layer (or two-layer, four-layer) soft composite material made of American DuPont MYLAR polyester film with high temperature resistant adhesive and two sides (or one side) of polyester film.
-
Polyester filmPolyester film
-
HT-601A/B-1 epoxy resin (with release agent)HT-601A/B-1 epoxy resin for LED, main agent HT-601A-1, curing agent HT-601B-1. The resin mixture has low viscosity at room temperature and can be used for a long time. Medium temperature and high temperature curing speed, mechanical strength, electrical properties, high temperature resistance, good transparency, low shrinkage, excellent TG value, high temperature resistance, especially suitable for LED packaging.HT-601A/B-1 epoxy resin (with release agent)0.00HT-601A/B-1 epoxy resin for LED, main agent HT-601A-1, curing agent HT-601B-1. The resin mixture has low viscosity at room temperature and can be used for a long time. Medium temperature and high temperature curing speed, mechanical strength, electrical properties, high temperature resistance, good transparency, low shrinkage, excellent TG value, high temperature resistance, especially suitable for LED packaging.
-
HT-701A/BHT-701A/B is a mid-range epoxy resin potting compound specially developed for LED DISPLAY. It has good operability and reactivity, and its hardened product has excellent mechanical strength and electrical insulation properties.HT-701A/B0.00HT-701A/B is a mid-range epoxy resin potting compound specially developed for LED DISPLAY. It has good operability and reactivity, and its hardened product has excellent mechanical strength and electrical insulation properties.
-
7018A/B-ZR (flame retardant)This product is a two-component liquid potting material and a room temperature curing epoxy resin. It has a series of characteristics such as fast curing speed at heating, excellent gloss of the cured product, good insulation, and good workmanship. It is widely used in capacitors and voltages. Insulation casting of small electronic components such as transformers, etc., the flame retardancy can reach 90-VO level.7018A/B-ZR (flame retardant)0.00This product is a two-component liquid potting material and a room temperature curing epoxy resin. It has a series of characteristics such as fast curing speed at heating, excellent gloss of the cured product, good insulation, and good workmanship. It is widely used in capacitors and voltages. Insulation casting of small electronic components such as transformers, etc., the flame retardancy can reach 90-VO level.
-
Grade H GHG PrepregH-grade GHG prepreg material is a pre-preg material made of polyimide film and alkali-free glass cloth, then immersed in B-grade H-grade resin solution, heated and baked.Grade H GHG Prepreg0.00H-grade GHG prepreg material is a pre-preg material made of polyimide film and alkali-free glass cloth, then immersed in B-grade H-grade resin solution, heated and baked.
-
Class F DMDF-grade DMD soft composite material is also called modified polyester film polyester fiber non-woven soft composite material. Three-layer flexible composite material.Class F DMD0.00F-grade DMD soft composite material is also called modified polyester film polyester fiber non-woven soft composite material. Three-layer flexible composite material.
-
detergentIt can be used to remove grease, rosin, flux and other polar or non-polar organic substances on the surface of electronic products, plastics, synthetic rubber, metal parts, etc., and can better remove soluble particles and ionic residues (do not use it as a cleaning agent) the use of).detergent0.00It can be used to remove grease, rosin, flux and other polar or non-polar organic substances on the surface of electronic products, plastics, synthetic rubber, metal parts, etc., and can better remove soluble particles and ionic residues (do not use it as a cleaning agent) the use of).
-
Release agent 68106810 is a solvent-free mold release agent for mold release. Mainly used for mold release of dry-type transformers.Release agent 68100.006810 is a solvent-free mold release agent for mold release. Mainly used for mold release of dry-type transformers.
-
Two-component epoxy resin core binding paint 7025A/B-17025A/B-1 environmental protection series of room temperature curing epoxy resin coatings can be applied by binding between the discus of the reactor. Excellent insulation performance and anti-rust ability, good adhesion, luster and strong hardness.Two-component epoxy resin core binding paint 7025A/B-10.007025A/B-1 environmental protection series of room temperature curing epoxy resin coatings can be applied by binding between the discus of the reactor. Excellent insulation performance and anti-rust ability, good adhesion, luster and strong hardness.
-
Two-component epoxy resin core coating 7025A/B7025A/B environmental protection series is a room temperature curing epoxy resin, which can be used for the iron core of dry-type transformers. Good insulation performance, good process performance and excellent surface gloss. It is an excellent epoxy resin coating for transformer core covering.Two-component epoxy resin core coating 7025A/B0.007025A/B environmental protection series is a room temperature curing epoxy resin, which can be used for the iron core of dry-type transformers. Good insulation performance, good process performance and excellent surface gloss. It is an excellent epoxy resin coating for transformer core covering.
News
Eight substation products of Chongren were rated as provincial excellent new products
2013-08-21Yang Guofei: The "post-80s" who forced German products to cut prices by three-quarters
2013-08-22— Online consultation —
If you have any questions, please consult, we will answer you as soon as possible! We are willing to cooperate with people from all walks of life wholeheartedly!
WeChat public account
Hongte new material
More exciting waiting for you!
Add:No. 222, Wang'anshi Avenue, Fuzhou High & New-tech Industrial Park, Jiangxi Province, China
Tel:0794-7888228
Fax:0794-7881095
Web:http://www.jxhongte.com
Copyright © Jiangxi Hongte Insulation Material Co., Ltd All Rights Reserved. 赣ICP备13003364号-1 seo Label