F-grade DMD epoxy prepreg is made of modified polyester film polyester fiber non-woven soft composite material (F-grade DMD) impregnated with heat-resistant epoxy resin and baked.

Composite polyester film is a three-layer (or two-layer, four-layer) soft composite material made of American DuPont MYLAR polyester film with high temperature resistant adhesive and two sides (or one side) of polyester film.

Polyester film

HT-601A/B-1 epoxy resin for LED, main agent HT-601A-1, curing agent HT-601B-1. The resin mixture has low viscosity at room temperature and can be used for a long time. Medium temperature and high temperature curing speed, mechanical strength, electrical properties, high temperature resistance, good transparency, low shrinkage, excellent TG value, high temperature resistance, especially suitable for LED packaging.

HT-701A/B is a mid-range epoxy resin potting compound specially developed for LED DISPLAY. It has good operability and reactivity, and its hardened product has excellent mechanical strength and electrical insulation properties.

This product is a two-component liquid potting material and a room temperature curing epoxy resin. It has a series of characteristics such as fast curing speed at heating, excellent gloss of the cured product, good insulation, and good workmanship. It is widely used in capacitors and voltages. Insulation casting of small electronic components such as transformers, etc., the flame retardancy can reach 90-VO level.

H-grade GHG prepreg material is a pre-preg material made of polyimide film and alkali-free glass cloth, then immersed in B-grade H-grade resin solution, heated and baked.

F-grade DMD soft composite material is also called modified polyester film polyester fiber non-woven soft composite material. Three-layer flexible composite material.

It can be used to remove grease, rosin, flux and other polar or non-polar organic substances on the surface of electronic products, plastics, synthetic rubber, metal parts, etc., and can better remove soluble particles and ionic residues (do not use it as a cleaning agent) the use of).

6810 is a solvent-free mold release agent for mold release. Mainly used for mold release of dry-type transformers.

7025A/B-1 environmental protection series of room temperature curing epoxy resin coatings can be applied by binding between the discus of the reactor. Excellent insulation performance and anti-rust ability, good adhesion, luster and strong hardness.

7025A/B environmental protection series is a room temperature curing epoxy resin, which can be used for the iron core of dry-type transformers. Good insulation performance, good process performance and excellent surface gloss. It is an excellent epoxy resin coating for transformer core covering.

8028A/B liquid epoxy resin is a room temperature resin specially used for coil repair and low voltage end sealing.

Epoxy resin HT-5018 B

Epoxy resin HT-5018 A

Epoxy resin HT-5016 A

Epoxy resin HT-5016 B

The raw materials used in 8086A/B double-group liquid unfilled epoxy resin are imported Shell bisphenol A resin and methyl hexahydroacid anhydride curing agent, which are processed and reacted by a special process. The product has advanced technological performance and good mechanical, electrical and heat dissipation performance. Applicable to: casting of dry-type transformers, dry-type reactors, special transformers, etc.

The raw materials used in 8088A/B two-component liquid epoxy resin with filler are imported Shell bisphenol A resin, methyl hexahydroacid anhydride curing agent, and domestic silicon micropowder, which are processed and reacted. The product has advanced technological performance and good mechanical, electrical and heat dissipation performance. Applicable to: Casting of dry-type transformers, dry-type reactors, special transformers, etc.