Tel：0794-7888228 
E-mail：rosejiang@jxhongte.com
Number of views:
1000
7018A/B-ZR (flame retardant)
Retail price
0.0
元
Market price
0.0
元
Number of views:
1000
Product serial number
Quantity
-
+
Stock:
0
Category
Product Center
1
Product description
Parameters
7018A/B-ZR (flame retardant) two-component black potting material
1. Instructions for use
This product is a two-component liquid potting material and a room temperature curing epoxy resin. It has a series of characteristics such as fast curing speed at heating, excellent gloss of the cured product, good insulation, and good workmanship. It is widely used in capacitors and voltages. Insulation casting of small electronic components such as transformers, etc., the flame retardancy can reach 90-VO level.
2. Properties before hardening
| main agent7018A-ZR | Hardener7018B-ZR | |
| color | black liquid | dark brown liquid |
| Viscosity40℃（mpa.s） | 1.2×102 | 30 |
| density20℃（g/cm3） | 1.7~1.8 | 1.1~1.15 |
3. How to use
A/B components are accurately weighed according to the proportioning standard, and used after fully stirring. If it is used in large-scale casting profiles, it can be completed by pouring glue several times.
Inventory conditions: placed in a cool and dark place, it can be stored for half a year.
4. Conditions of use
| mixing ratio | A:B=100:20weight ratio |
| gel time | 25℃×5Hour |
| Available time | 25℃×3小时 Mixed amount100g |
| hardening condition | 25℃×48hours or80℃×4 hours medium temperature curing |
5. Properties after hardening
| Volume resistance25℃ | Ohm.Cm | 1.2×1015 |
| surface resistance25℃ | Ohm | 1.3×1014 |
| Withstand voltage25℃ | KV/mm2 | 16~19 |
| Compressive strength25℃ | Kg/mm2 | 20~23 |
| Bending strength | Kg/mm2 | 9~11 |
| Impact strength | Kg/cm/mm2 | 6~9 |
| Yuden rate | 1Khz | 3.8 |
|
Yuden loss
|
1Khz | 0.02 |
| Heat distortion temperature | ℃ | 90-100 |
| hardness | Shored | 80-85 |
Keyword:
it
and
mm2
of
in
is
curing
25
temperature
Previous
HT-701A/B
Next
Grade H GHG Prepreg
Related Products
-
Class F DMD PrepregF-grade DMD epoxy prepreg is made of modified polyester film polyester fiber non-woven soft composite material (F-grade DMD) impregnated with heat-resistant epoxy resin and baked.Class F DMD Prepreg0.00F-grade DMD epoxy prepreg is made of modified polyester film polyester fiber non-woven soft composite material (F-grade DMD) impregnated with heat-resistant epoxy resin and baked. -
PET composite filmComposite polyester film is a three-layer (or two-layer, four-layer) soft composite material made of American DuPont MYLAR polyester film with high temperature resistant adhesive and two sides (or one side) of polyester film.PET composite film0.00Composite polyester film is a three-layer (or two-layer, four-layer) soft composite material made of American DuPont MYLAR polyester film with high temperature resistant adhesive and two sides (or one side) of polyester film. -
Polyester filmPolyester film -
HT-601A/B-1 epoxy resin (with release agent)HT-601A/B-1 epoxy resin for LED, main agent HT-601A-1, curing agent HT-601B-1. The resin mixture has low viscosity at room temperature and can be used for a long time. Medium temperature and high temperature curing speed, mechanical strength, electrical properties, high temperature resistance, good transparency, low shrinkage, excellent TG value, high temperature resistance, especially suitable for LED packaging.HT-601A/B-1 epoxy resin (with release agent)0.00HT-601A/B-1 epoxy resin for LED, main agent HT-601A-1, curing agent HT-601B-1. The resin mixture has low viscosity at room temperature and can be used for a long time. Medium temperature and high temperature curing speed, mechanical strength, electrical properties, high temperature resistance, good transparency, low shrinkage, excellent TG value, high temperature resistance, especially suitable for LED packaging. -
HT-701A/BHT-701A/B is a mid-range epoxy resin potting compound specially developed for LED DISPLAY. It has good operability and reactivity, and its hardened product has excellent mechanical strength and electrical insulation properties.HT-701A/B0.00HT-701A/B is a mid-range epoxy resin potting compound specially developed for LED DISPLAY. It has good operability and reactivity, and its hardened product has excellent mechanical strength and electrical insulation properties. -
7018A/B-ZR (flame retardant)This product is a two-component liquid potting material and a room temperature curing epoxy resin. It has a series of characteristics such as fast curing speed at heating, excellent gloss of the cured product, good insulation, and good workmanship. It is widely used in capacitors and voltages. Insulation casting of small electronic components such as transformers, etc., the flame retardancy can reach 90-VO level.7018A/B-ZR (flame retardant)0.00This product is a two-component liquid potting material and a room temperature curing epoxy resin. It has a series of characteristics such as fast curing speed at heating, excellent gloss of the cured product, good insulation, and good workmanship. It is widely used in capacitors and voltages. Insulation casting of small electronic components such as transformers, etc., the flame retardancy can reach 90-VO level. -
Grade H GHG PrepregH-grade GHG prepreg material is a pre-preg material made of polyimide film and alkali-free glass cloth, then immersed in B-grade H-grade resin solution, heated and baked.Grade H GHG Prepreg0.00H-grade GHG prepreg material is a pre-preg material made of polyimide film and alkali-free glass cloth, then immersed in B-grade H-grade resin solution, heated and baked. -
Class F DMDF-grade DMD soft composite material is also called modified polyester film polyester fiber non-woven soft composite material. Three-layer flexible composite material.Class F DMD0.00F-grade DMD soft composite material is also called modified polyester film polyester fiber non-woven soft composite material. Three-layer flexible composite material.
Previous page
1
2
3
Next page
WeChat public account
Hongte new material
More exciting waiting for you!
Add：No. 222, Wang'anshi Avenue, Fuzhou High & New-tech Industrial Park, Jiangxi Province, China
Tel：0794-7888228
Fax：0794-7881095
Web：http://www.jxhongte.com
Copyright © Jiangxi Hongte Insulation Material Co., Ltd All Rights Reserved. 赣ICP备13003364号-1 seo Label